Industrial Automatic Commercial Electric 304 Stainless Steel Beef Chicken Vegetable Fish Carrot Duck Cutting Equipment Cube Dicing Machine

• Customization: Available
• After-sales Service: Online Service
• Warranty: 2 Years
• Model NO.: JU-350
• Power Source: Electric
• Process: Meat Cutter Machine
• Automatic Grade: Automatic
• Type: Meat Cutter Machine
• Voltage: 220V
• Customized: Customized
• Cutting Grid Size: 10×10mm
• Weight: 310kg
• Dimension: 1570*850*1100mm
• Capacity: 500-600kg/H
• Transport Package: Wooden Case Packing
• Specification: 1570*850*1100mm
• Trademark: JUYOUMECH
• Origin: Henan China
• Package Size: 156.00cm * 120.00cm * 86.00cm
• Package Gross Weight: 286.000kg

Product Description

Industrial Automatic Commercial Electric 304 Stainless Steel Beef Chicken Vegetable Fish Carrot Duck Cutting Equipment Cube Dicing Machine
 parameters

model	JYQD-350#	JYQD-550#
capacity	500-600kg/h	700-900kg/h
matercial max length	350mm	550mm
cutting slot size	84×84×350mm	120×120×550mm
cutting grid size	10×10mm	10×10mm
total power	3.2kw	3.7kw
Oil pump motor power	1.5kw	1.5kw
main motor power	1.7kw	2.2kw
weight	310kg	550kg
dimension	1570*850*1100mm	1970*980*1100mm
Cucutting grid size	4.5.6.7.8.10.12.16.24.30mm(can be customized)

Installation

1. After removing the bag, the machine is transported to the working position by forklift;
2. Adjust the adjustment foot under the machine to make the machine position smoothly;
3. Check whether the appearance is damaged due to the transportation surface;
4. Check oil level of oil tank and reducer;
5. Check whether the movement of each moving part is flexible, whether the gap between the main cutter and the cutter gate is appropriate, and that there is no foreign matter in the cutting groove;
6. Check that all fastening screws should not be loose, defective, and the installation of the knife grid and main cutter should be stable
power on inspection

1. When the pre pressure is set to zero, close the front door and the side pressure mechanism, that is, power on, the push rod and the cutter have action, which indicates that the electric shielding procedure is correct. If the push rod does not work, it indicates that the phase sequence of the power supply is incorrect. Just change the two positions of the three-phase power line to each other
2.  If the front door is opened or the side pressure parts are pulled out during operation, the machine should stop working immediately. If the machine is still working, the corresponding induction switch of the front door or side pressure mechanism is damaged or the position is moved, and it should be checked, adjusted or replaced immediately.
3.  When the action is normal, the suitable meat can be added to check the pre pressure and stepping action. Cut the harder material with a larger pre pressure, and cut the softer material with a smaller pre pressure. If the initial cutting material is too long, the pre pressure should be reduced appropriately. If the initial cutting material is too short, the pre pressure can be increased.
4. When the push rod reaches the front and cannot return, and the cutter is still rotating, the front inductive switch under the push block is damaged or the position is moved, so the position should be readjusted or the inductive switch should be replaced.
5. When the push rod returns to the rear and the oil pump is still working, the inductive switch under the push block is damaged or the position is moved,  The position should be readjusted or the inductive switch should be replaced.